Okuma magnetix mg20-cs
-
- Member
- Posts: 31
- Joined: Tue Sep 08, 2009 12:00 am
- Location: clacton
Okuma magnetix mg20-cs
just wondering if anyone can help out. now when casting it makes a funny noise like a kind rachet sound but it is in the off postion but it still flys out a good distance for an overhead thump of the pier. has anyone heard a similar thing and if so any remedies. thanks
-
- Member
- Posts: 98
- Joined: Thu Feb 11, 2010 12:00 am
It's normal for this reel- a friend of mine was asked to test a pair for a customer who had returned them to the local shop as they were noisy in exactly the way you describe- one was noisier than the other but they both cast fine as yours does.
You could clean the bearings with WD or lighter fuel and re-oil them to see if that improves the noisiness but i wouldnt worry as long as the reel is running ok
You could clean the bearings with WD or lighter fuel and re-oil them to see if that improves the noisiness but i wouldnt worry as long as the reel is running ok
-
- Advanced User
- Posts: 659
- Joined: Thu Jan 21, 2010 12:00 am
- Location: Cramlington, Northumberland. (and South Shields)
-
- Member
- Posts: 98
- Joined: Thu Feb 11, 2010 12:00 am
-
- Advanced User
- Posts: 659
- Joined: Thu Jan 21, 2010 12:00 am
- Location: Cramlington, Northumberland. (and South Shields)
-
- Member
- Posts: 31
- Joined: Tue Sep 08, 2009 12:00 am
- Location: clacton
-
- Regular
- Posts: 399
- Joined: Tue Jul 29, 2008 12:00 am
- Location: Jedburgh