| View previous topic :: View next topic |
| Author |
Message |
gmackinnon

Joined: Sep 13, 2008 Posts: 4 Location: Auchmithie , Scotland
|
Posted: Mon Sep 15, 2008 1:13 am Post subject: Any tips for starting beachcasting. |
|
|
I have just moved to Auchmithie , ( North of Arbroath ).
I am new to beachcasting , used to fish from boats on Skye.
There is a shingle beach and rocky outcrops with nearby cliffs.
Any tips for what gear to use for beachcasting appreciated.
Cheers. |
|
| Back to top |
|
 |
rabbi2 NW Coast / General Moderator


Joined: Sep 05, 2007 Posts: 3913 Location: Blackburn. Lancashire
|
Posted: Mon Sep 15, 2008 7:30 am Post subject: |
|
|
As a starting kit I would start with nothing too exspensive. Say a 12ft shakespear beachcaster rung for a fixed spool reel, a Okuma eclipz EZ-65 fixed spool reel loaded with 18lb line for a shingle type beach, a good sturdy tripod, a small selection of rigs and weights. And last but not least a lorra, lorra . LUCK Cheers keith
Oh by the way a warm welcome to the forum mate. Good luck in you new venture
Last edited by rabbi2 on Mon Sep 15, 2008 8:07 am; edited 1 time in total |
|
| Back to top |
|
 |
gmackinnon

Joined: Sep 13, 2008 Posts: 4 Location: Auchmithie , Scotland
|
Posted: Mon Sep 15, 2008 8:04 am Post subject: Any tips for starting beachcasting |
|
|
Thanks for that.
Got some decent gear from Sea Fishing Supplies.co.uk and Tacklebargains.co.uk.
Can't wait to get started.
Graham  |
|
| Back to top |
|
 |
fishhunter Member


Joined: Jul 29, 2008 Posts: 83 Location: Jedburgh
|
Posted: Tue Sep 23, 2008 7:08 pm Post subject: Re: Any tips for starting beachcasting |
|
|
| gmackinnon wrote: |
Thanks for that.
Got some decent gear from Sea Fishing Supplies.co.uk and Tacklebargains.co.uk.
Can't wait to get started.
Graham  |
bet you never got your hands on the reel that rabbi mentioned...only found one place in the uk with it and they only had three in stock... |
|
| Back to top |
|
 |
rabbi2 NW Coast / General Moderator


Joined: Sep 05, 2007 Posts: 3913 Location: Blackburn. Lancashire
|
Posted: Tue Sep 23, 2008 7:21 pm Post subject: |
|
|
| Surley your joking about the reel? |
|
| Back to top |
|
 |
eccles Advanced User


Joined: May 19, 2005 Posts: 1592 Location: Hayling Island, Hampshire
|
Posted: Tue Sep 23, 2008 7:55 pm Post subject: |
|
|
| Another tip my friend: Do try to learn the "Off the ground" casting technique as soon as possible. You should be able to roughly get the hang of it with a couple of hours practice and when you really get it together, you will be able to cast well over 100 yds which can be very useful. |
|
| Back to top |
|
 |
gmackinnon

Joined: Sep 13, 2008 Posts: 4 Location: Auchmithie , Scotland
|
|
| Back to top |
|
 |
eccles Advanced User


Joined: May 19, 2005 Posts: 1592 Location: Hayling Island, Hampshire
|
Posted: Wed Sep 24, 2008 6:43 am Post subject: |
|
|
| That vid is not quite good enough in my opinion: He does not explain that the sinker should be on the ground at right angles to the rod tip or that the rod tip starts at about 2 o'clock behind you (the sea being in the 6 o'clock position). The other important factors which are often not explained very well are: 1. You do not need to put any power into the rod until the rod tip is travelling upwards and is roughly in the 9 o'clock postion. That is when one should deliver the real punch or "final flick" as I call it. 2. The sinker will automatically tend to go where you are looking so it is very important to be looking up into the sky at about 45 degrees when you come round towards the sea because mor height gives you greater distance. Have a look at this mate, I think it's a bit better: http://neilmackellow.sea-angler.org/otg.html |
|
| Back to top |
|
 |
gmackinnon

Joined: Sep 13, 2008 Posts: 4 Location: Auchmithie , Scotland
|
Posted: Wed Sep 24, 2008 10:44 am Post subject: |
|
|
Thanks for that.
It is clearer to see in individual frames.
I noticed he did not mention the weight angle.
I have read up on casting on a few sites but couldn't find one with pictures.
Cheers
 |
|
| Back to top |
|
 |
rabbi2 NW Coast / General Moderator


Joined: Sep 05, 2007 Posts: 3913 Location: Blackburn. Lancashire
|
Posted: Wed Sep 24, 2008 10:48 am Post subject: |
|
|
Eccles my mate I am going to have to visit you one day for casting lessons as I can hit about 80yds but it may be my arthritus in my spine thats the problem.
cheers
keith |
|
| Back to top |
|
 |
eccles Advanced User


Joined: May 19, 2005 Posts: 1592 Location: Hayling Island, Hampshire
|
Posted: Wed Sep 24, 2008 11:06 am Post subject: |
|
|
| I know another angler with your problem rabbi2, it's a bit of a sod ain't it. Can you rotate your upper body around your hips without too much trouble? Cos that's what the OTG is really all about. Doesn't have to be that fast or powerfully because the real power in the OTG is delivered with the final punch from your right arm in particular. I have found that a 12 -13 ft rod works best, the longer rods tend to be awkward. I was very interested to see that Mackellow favours a rod which is just 13' 4" when he visited Hayling a couple of years ago. |
|
| Back to top |
|
 |
johnnyd Member


Joined: Aug 18, 2008 Posts: 55 Location: Seaton Sluice, Northumberland
|
Posted: Wed Sep 24, 2008 11:16 am Post subject: |
|
|
Gmackinnon/Rabbi
the video posted is of Roger mortimore who is a former UKSF champion- as indeed was neil mackellow. Having cast with Roger on the field at a casting tournament I can tell you he is well respected amongst tourno casters and anglers alike- he knows what he is talking about and helped a friend of mine no end getting him up to 180 yds (that's measured - not a guesstimate).
The video link you posted shows the correct technique for an Off The Ground cast- The best thing for you to do if you're interested in casting properly and learning correct technique is to either get yourself a lesson from an instructor or go along to a casting club. You'll receive loads of help and start you off wth the correct techniques - this sets you on the road right from the start rather than getting yourself into bad habits which you then have to try and get rid of before you can cast properly.
Cheers
Johnny |
|
| Back to top |
|
 |
rabbi2 NW Coast / General Moderator


Joined: Sep 05, 2007 Posts: 3913 Location: Blackburn. Lancashire
|
Posted: Wed Sep 24, 2008 12:03 pm Post subject: |
|
|
| I can rotate my upper part of my body without too much trouble but not fast otherwise I'll suffer for a couple of days. Cheers keith |
|
| Back to top |
|
 |
fishhunter Member


Joined: Jul 29, 2008 Posts: 83 Location: Jedburgh
|
Posted: Wed Sep 24, 2008 6:45 pm Post subject: |
|
|
| rabbi2 wrote: |
| Surley your joking about the reel? |
not joking about the reel only found one site in the uk after hours of searching which had it in stock even on ebay only one USA seller had one |
|
| Back to top |
|
 |
fishingpunk

Joined: Nov 08, 2008 Posts: 4 Location: Edinburgh
|
Posted: Sat Nov 08, 2008 7:24 pm Post subject: |
|
|
| Dude , use a shock leader .... 5-10 mtrs of 50-60lb line tied between your reel line and terminal tackle and cast as hard as you can and you will add loads of distance and never crack off , so to speak. Avoid mulltipliers when starting , practice on one of your mates multipliers first and get one if you can get the hang of it. |
|
| Back to top |
|
 |
|